60814hk tc-00003131/52098ha/52595gi/n098ta,ts no. a2797-1/2 http://onsemi.com semiconductor components industries, llc, 2014 june, 2014 DBF40G 4.0a single-phase bridge rectifer features ? glass passivation for high reliability ? plastic molded structure ? peak reverse voltage : v rm =600v ? average output current : i o =4.0a specifcations absolute maximum ratings at ta=25c parameter symbol conditions value unit peak reverse voltage v rm 600 v average output current i o tc = 108 c,with 80801.5mm3 al fin 4.0 a ta = 25 c,without fin 2.3 a surge forward current i fsm 50hz sine wave, 1cycle 80 a junction temperature tj 150 c storage temperature tstg --40 to +150 c electrical characteristics at ta=25c parameter symbol conditions value unit min typ max forward voltage v f i f =2.0a 1.05 v reverse current i r v r =v rm 10 m a thremal resistance(junction-ambient) rth(j-a) without fn 30 c / w thremal resistance(junction-case) rth(j-c) with al fn 5.5 c / w ordering number : en2797b package dimensions unit:mm(typ.) ordering information device shipping memo DBF40G 250 pcs./box pb-free stresses exceeding those listed in the maximum ratings table may damage the device. if any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. product parametric performance is indicated in the electrical characteristics for the listed test conditions, unless otherwise noted. product performance may not be indicated by the electrical characteristics if operated under different conditions. electrical connection
DBF40G ps no. a2797-2/2 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner.
|
